Starch powder conditioning plant type 361.10
Machine for the drying and cooling of starch powder

With the WDS low temperature flash drier with consecutive cooling screw, approx. 1/3 of the humidity at input can be removed from the starch powder (e.g. from 9 to 6 percent). The powder heated during the drying process is then cooled back down to the original powder temperature. The end humidity and end temperature can be adjusted.

Advantages
	Constant operating conditions over the whole year (independent of the condition of the exterior air, due to pre-cooling of air)
	Energy recovery using a cross-flow heat exchanger incoming air against outgoing air
	Uniform drying of all powder grains (no partial overheating)
	Independent of the room climatisation due to use of exterior air
	With explosion protection certificate