Manufacturing Plants for Fondant & Toffee
"A Must-eat-pleasure"

Jelly articles / Starchless plants

Jelly articles / Starchless plants

The compact, modularly constructed moulding plant, type 165, is designed for the production of fondant, toffee, pectin and carrageen products.

Product samples

Fondant & Toffee product
Fondant & Toffee product
Fondant & Toffee product

Characteristics

  • Servo electrical drives
  • Memory capacity for almost unlimited number of recipes
  • Frame construction of aluminium solid profiles with stainless steel coating
  • Loose mould line with well-proven mould supports
  • Continuous product discharge
  • Hygienic and easy handling line conception

Components – moulding line type 165

Depositing station

Depositing station

  • Modular construction of the depositor
  • Basic equipment is designed for mono-depositing.
  • Adding further components, One-Shot or Triple-Shot depositing is possible.
  • Thermal separation of the pump system is possible.
  • Deposit of complete mould with one depositing stroke.
  • In-line movement of hopper
  • Hopper can be removed to the side
  • Servo electrical drives
Cooling cabinet

Cooling cabinet

Layout of the cooling cabinet according to desired speed of line.

  • Mould transport by endless chain
  • Loose mould principle
  • Mould supports keep moulds always in horizontal position
  • Cooling station integrated in insulation cladding
  • Cooling by adjustable cold air stream
Demoulding station

Demoulding station

  • Demoulding of product by ejection roller on discharge belt
  • Mould return
  • Discharge of product in longitudinal direction of line
  • Adjustable height of product discharge
  • Demoulding station laterally extractable
Mould exchange station

Mould exchange station

Consisting of insertion and removal magazine

  • Consisting of insertion and removal magazine
  • Paternoster principle
  • Up to 50 cycles / min
  • Servo electrical drives

Technical data

  • Speed of line up to 50 moulds / min
  • Mould size 1052 x 165 x 40 mm
  • Plastic frame with consolidated silicone inserts, lateral guides are part of the plastic frame
  • Up to 108 products / mould
  • Capacity up to 2 t / h (depending on product weight and geometry)